Carbon Fiber Wheel Well Trim D.I.Y. Kit
The Do-It-Yourself kit will include (4) pieces of Carbon Fiber trim molding measuring 6 feet (72 inches) in length and 3/4" in width. The trim is made of flexible high quality plastic with a 3M adhesive tape on the back. You will be cutting the trim yourself to fit your wheel wells. The carbon fiber trim can easily be cut to length with any pair of shears or scissors.
· General Installation Instructions will be included with the kit
· The trim is manufactured to withstand the most brutal weather conditions Mother Nature has to offer
· Please note that this is not actual carbon fiber that is stiff and rigid, this is a plastic molding that is flexible to allow it to contour to your vehicles surface.
· Please measure your wheel wells before purchasing to ensure this will fit your vehicle and give the desired look
Sample of the Carbon Fiber Trim:
(1) - Measure the distance around your wheel well for each wheel.
(2) - Cut the trim to the measurement you just took (measure twice and cut once).
(3) - Cleaning off the area of application with rubbing alcohol or water to remove any dirt, grim or waxes
(4) - Remove the strip covering the adhesive
(5) - Apply the trim to the wheel well lip
(6) - Repeat for the remaining sections